2.2kW TechTop TML Motor 6 Pole Aluminium 1 Phase 240V Run Capacitor CS/CR Foot Mount B3 Frame 112M6 & Manual Overload

Techtop’s TM series are ideally suited to general purpose applications and are available in both permanent split capacitor (TMY) and cap/start–cap/run (TML) series.

Operating parameters

Standard TM series motors are designed with the following parameters:

• 220V to 240V, 50Hz supply

• Continuous (S1) duty

• Ambient temperatures up to 400C

• Installation up to 1000 MASL

Standards

Dimensions and rated outputs for the TM series conform to Australian Standard AS/NZS 1359 and International Standards IEC 60034 and IEC 60072.

Insulation class

TM motors are insulated with Class F materials and limited to Class B temperature rise.

IP Protection

The standard degree of enclosure protection is IP 55 (increased IP protection is available). Shafts are fitted with an oil seal as standard.

Multi-mount design

As standard, TM series motors are fitted with detachable feet. The multi-mount design allows for the motor feet to be removed and repositioned to either side to produce a side-mounted terminal box.

Fan & Gearbox application

TM series motors are low weight design and come standard with a drilled and tapped hole in the shaft which makes this series ideal for fan applications. This motor series is also ideally

suited for fitting to aluminium gearboxes.

Terminal box

The terminal box is manufactured from aluminium and is mounted on top of the motor as standard.

Bearings

Bearings fitted are high quality NSK deep groove ball bearings that are sealed for life.

Surface Finish

As standard TM motors are painted with high-quality alkyd enamel with the final colour being RAL 7024 Graphite Grey. Other colours are available upon request.