Schaeffler Bearing Housings

Bearing housings support your bearings. Protecting them from contaminants while holding in lubricant.

Schaeffler FAG provides two design assemblies, split and unsplit plummer block housings that have proven successful in machinery, plant and equipment. Typically made from predominately cast iron, however, the FAG bearing housings can be supplied in cast steel or spheroidal graphite cast iron if required.

Split plummer block housing designs have a simplified assembly with the have the ability of the upper part of the housing to be removed. This allows for easy maintenance.

Unsplit plummer block housings are used in applications that require high demands on bearings.

Split Plummer Block Housings SNS

Split plummer block housings SNS are highly robust and therefore particularly suitable for aggressive environmental conditions such as those in mining applications.

The housings are designed in accordance with a modular concept. Each housing can be fitted with rolling bearings of various diameter and width series if they have the correct outside diameter for the housing.

  • Designed in accordance with a modular concept and are highly versatile in application 
  • Suitable for different bearing types and sizes with bore diameters from 115 mm to 530 mm 
  • Lead, as a result of their design, to optimised load distribution and thereby increase the rating life of the bearing by up to 50% 
  • Give a reduction, due to the lower replacement frequency of the bearing fitted, in total costs over the running time

Split Plummer Block Housing SNV

Split plummer block housings SNV and the associated bearings form bearing arrangement units that can be matched, through the appropriate selection of accessories, to a wide range of applications. Applications include agricultural machinery, the paper processing industry, mining, materials processing, the steel industry and power stations.

The housings are designed in accordance with a modular concept. Each housing can be fitted with rolling bearings of various diameter and width series if they have the correct outside diameter for the housing.

  • Designed in accordance with a modular concept and are highly versatile in application
  • Suitable for different bearing types and sizes with bore diameters from 20 mm to 160 mm 
  • Can be combined with an extensive range of seals covering a wide range of requirements and temperatures

Contact us about Schaeffler Bearing Housings

Please contact us using the form below or send us an email.